What Skilled Trade Workers Earn in Australia and How to Start
Licences, apprentice wage stages, and where to check current trade rates
Published · 11 min read
Skilled trades in Australia — electrical, plumbing, carpentry, fabrication and more — are usually entered through a paid apprenticeship attached to a nationally recognised qualification, not a university degree. Most trade licences require a relevant Certificate III or IV plus a completed apprenticeship of three to four years (TradieVerify, undated), and pay during that time is typically set as a rising percentage of a qualified tradesperson's rate under a modern award.
What you earn afterwards depends on your trade, your state, whether you work as an employee or a licensed contractor, and the industry you end up in. This guide covers the day-to-day work, who hires, how pay is structured, and exactly where to look up current numbers yourself.
What the Job Actually Involves Day to Day
Skilled trade work in Australia is almost entirely on-site. There is no remote version of pulling cable, roughing in drainage, hanging a frame or welding a structural joint. Your workplace changes with the job: residential builds, commercial fit-outs, factories, hospitals, mine sites, water and power networks, or customers' homes.
A typical day starts early. On construction sites, 6.30am or 7am starts are common, with the day finishing mid-afternoon. Maintenance and service trades often run a fixed weekday roster with an on-call or after-hours component. Industrial, mining and shutdown work can mean 12-hour shifts, night work, or fly-in fly-out rosters away from home for a week or more at a time.
The tasks vary by trade but the shape is similar: read the plans or work order, check the site is safe and isolated, set up, do the work to the relevant standard, test or inspect it, clean up, and record what you did. Paperwork matters more than people expect — job sheets, test results, compliance certificates, timesheets and variation notes.
Tools are a mix of what you own and what the employer supplies. Hand tools and basic power tools are usually yours; plant, test instruments and access equipment are usually the employer's. Personal protective equipment is typically supplied on site.
Tickets sit alongside the trade qualification. Boilermaker and welding roles, for example, may need a White Card for construction sites and High Risk Work Licences for rigging, scaffolding or crane operation rather than a single state trade licence (Aussie Work, undated). Expect to add tickets over your career rather than finish with the ones you started with.
As an apprentice, you work four days a week on the tools and spend the other time at a registered training organisation, or in block release — your training contract sets this out.
Where Companies Actually Hire From Australia
The employer types below cover most of the hiring in Australian trades. Which ones dominate depends on your state and whether you are in a capital city, a regional centre or a resources region.
- Small and medium trade contracting businesses. The largest single source of apprenticeships and qualified roles — electrical, plumbing, carpentry, HVAC, refrigeration and fabrication firms employing anywhere from two to a hundred people.
- Head contractors and builders. Residential, commercial and civil builders who employ trades directly or engage subcontractors.
- Group training organisations and Apprentice Connect Australia providers. These employ or place apprentices and rotate them between host employers. The Australian Government's apprenticeship guidance directs new apprentices to sign up with an Apprentice Connect Australia provider (my.gov.au, undated).
- Labour hire and staffing agencies. Common for shutdowns, peak construction periods and industrial maintenance. Work is often casual with a higher hourly rate in place of leave entitlements.
- Mining, resources and energy contractors. Site-based maintenance, fabrication and electrical roles, frequently on FIFO or drive-in drive-out rosters. If this is where you are heading, read the site guide to Australia's mining industry before you apply.
- Government, councils and utilities. Water, power, rail and facilities maintenance employers who hire tradespeople as ongoing staff.
- Manufacturing and fabrication workshops. Indoor, roster-based work for welders, boilermakers, fitters and electrical trades.
- Self-employment as a licensed contractor. In NSW, residential building or trade work above a stated value in labour and materials including GST requires a Contractor Licence (Alpha Technical Training, undated). Licensing thresholds and conditions differ in every state and territory.
How Pay Is Usually Structured
Most trade employees are covered by a modern award that sets minimum hourly rates, allowances, overtime and penalty rates. Enterprise agreements, common on large construction and resources sites, can set higher rates. Contractors quote their own prices and carry their own costs.
| Pay model | What determines the rate | Where to check current numbers |
|---|---|---|
| Apprentice percentage of tradesperson rate | Year of apprenticeship, award, and in some awards whether you completed year 12. Under the Plumbing and Fire Sprinklers Award, apprentices engaged on or after 1 January 2014 who have not completed year 12 are paid 50% of the tradesperson rate in year 1, 60% in year 2, 70% in year 3 and 90% in year 4 (Fair Work Ombudsman, undated). Under the Electrical, Electronic and Communications Contracting Award, junior apprentices who commenced before 1 January 2014 are paid 40%, 52%, 70% and 82% of the Electrical worker grade 5 minimum across the four years (Fair Work Ombudsman, undated) | Fair Work Ombudsman Pay Guides: https://www.fairwork.gov.au/pay-and-wages/minimum-wages/pay-guides |
| Hourly, award-based employee | Award classification, trade, state loadings, casual loading, overtime and site allowances | Fair Work Ombudsman Pay Guides for your award: https://www.fairwork.gov.au/pay-and-wages/minimum-wages/pay-guides |
| Hourly, employer-advertised | Trade, tickets held, experience, urgency and location. Job listings for electricians have advertised rates such as 'Up to $56 PH' and '$40 – $50 per hour' for specific roles (SEEK, undated) | Current job ads on major job boards: https://au.seek.com/electrician-jobs |
| Annual salary | Permanent roles in utilities, manufacturing, facilities and mining; often includes a roster or site allowance | Salary insight pages on job boards, which show carpenters and mechanics both averaging between $80k and $95k and trade assistants commonly $65k–$85k (SEEK, undated): https://au.seek.com/career-advice/article/highest-paying-trades-in-australia |
| Occupation-wide benchmark | National median earnings by occupation, useful for sanity-checking an offer | Jobs and Skills Australia publishes median weekly earnings by ANZSCO occupation from ABS Labour Force Survey and Census data (Jobs and Skills Australia, February 2026): https://www.jobsandskills.gov.au/data/occupation-and-industry-profiles/occupations-anzsco |
| Contract / per-job pricing | Your quoted price, less materials, insurance, vehicle, tools, superannuation and tax you fund yourself | Compare against employee award rates plus your own cost base |
Rates vary significantly by city and region. Job board data has shown tradesperson pay averaging roughly $137.5k in Brisbane and $130k in Sydney versus around $83.3k in Perth (SEEK, undated) — treat city comparisons as a prompt to research your own market, not a rule.
How to Get Started
- Pick the trade, then check the licence it leads to. Electrician licensing requires the Certificate III in Electrotechnology Electrician (UEE30820), a four-year apprenticeship and state-specific assessments; plumbing requires the Certificate III in Plumbing (CPC32420) and a four-year apprenticeship, with possible drainage stream competencies (Aussie Work, undated). Confirm the exact requirement with your state or territory licensing authority before you enrol anywhere.
- Research careers and training options. The Australian Government's steps for starting an apprenticeship are to research industries, careers and courses, understand study options, wages and job outcomes, find out what apprenticeships are available, and sign up with an Apprentice Connect Australia provider (my.gov.au, undated). The Australian Apprenticeships Pathways website provides career and training information for occupations offering apprenticeships and traineeships (Department of Employment, 2015).
- Get your entry tickets. A White Card is the standard requirement for construction sites. Add a driver's licence if you can — most trade ads assume one.
- Build a one-page resume aimed at tradespeople who read fast. Put your tickets, qualification progress, licence, availability and reliable transport at the top. List any hands-on work — labouring, warehouse, farm, workshop, home renovation — with what you physically did. Add two contactable referees.
- Sort your employment paperwork. Have your tax file number and a superannuation fund ready to give an employer, plus bank details for direct deposit. Pay in Australia is paid into a bank account by an employer who also pays superannuation — be wary of any arrangement that avoids this.
- Apply in two directions at once. Respond to advertised apprentice and trade assistant roles on major job boards, and approach local contractors directly by phone or in person with your resume. A first application should include a short message naming the trade you want, your tickets, your availability, how you will get to site, and a line on why that employer specifically.
- If your trade skills were gained overseas, start with a skills assessment. Trades Recognition Australia is a skills assessment service for people with trade skills gained overseas or in Australia for the purpose of migration, and offers programs including the Provisional Skills Assessment and the Job Ready Program based on occupation, country of passport, place of study and visa type sought (Trades Recognition Australia, undated). Details are at https://www.tradesrecognitionaustralia.gov.au/
What to Check Before Accepting an Offer
- Confirm the business is real and registered. Ask for the legal entity name and ABN, and check the trade licence or contractor licence number on your state or territory licensing register.
- Identify the award or agreement that covers you, then compare the offer against the minimum in the Fair Work Ombudsman's Pay Guides, which publish minimum rates for full-time, part-time and casual employees under each modern award (Fair Work Ombudsman, undated): https://www.fairwork.gov.au/pay-and-wages/minimum-wages/pay-guides
- Check employment type and payment method. Employee or contractor, permanent or casual, weekly or fortnightly pay, superannuation paid, payslips issued. If you are asked to get an ABN for work that looks like an employee job, ask why.
- Never pay to be placed. Fees for a job, a 'registration', tools you must buy from the employer, or a licence the employer arranges are a reason to walk away.
- Confirm hours, roster and travel. Start times, expected overtime, on-call, weekend work, site locations, and for FIFO roles the roster pattern, flights and accommodation. Get it in writing.
- For an apprenticeship, confirm the training contract. Which Apprentice Connect Australia provider, which registered training organisation, how off-the-job training is scheduled, and who pays course fees.
- Clarify tools, PPE and vehicle. What you must supply, what is reimbursed, and whether a tool allowance applies.
- Ask about ongoing obligations. Some trades require continuing professional development and current public liability insurance, and requirements vary by state and trade type (TradieVerify, undated).
- Read employer reviews. SEEK hosts company review pages alongside its job listings — read these together with the ad: https://au.seek.com/electrician-jobs
Frequently asked questions
Do I need a university degree to work in a skilled trade in Australia?
No. Most trade licences require completion of a relevant Certificate III or IV qualification and a completed apprenticeship of three to four years (TradieVerify, undated). The Certificate III in Electrotechnology (UEE30820), for example, is described as the nationally recognised qualification required to become a licensed electrician in Australia (Centre for Electrical Training, undated). Check your state or territory licensing authority for the exact qualification your trade requires.
How much do apprentices earn compared to qualified tradespeople?
Apprentices are generally paid a percentage of the qualified tradesperson rate that increases each year. Under the Plumbing and Fire Sprinklers Award, apprentices engaged on or after 1 January 2014 who have not completed year 12 are paid 50% of the tradesperson rate in year 1, rising to 90% in year 4 (Fair Work Ombudsman, undated). Look up the current dollar figures in the Fair Work Ombudsman's Pay Guide for your award at https://www.fairwork.gov.au/pay-and-wages/minimum-wages/pay-guides
What tools and equipment do I need to start?
Apprentices are usually expected to build up a basic hand tool kit over time; many employers provide a starter kit or a tool allowance. Larger plant, test instruments and access equipment are normally the employer's. Ask for a written list before you start so you are not spending money you did not budget for.
What tickets do I need besides the trade qualification?
A White Card is standard for construction sites. Depending on the work, you may also need High Risk Work Licences — for example, boilermaker and welder roles may need a White Card plus High Risk Work Licences for rigging, scaffolding or crane operation rather than a single state trade licence (Aussie Work, undated). Confirm with the employer and your state regulator.
I trained as a tradesperson overseas. What is the first step?
Trades Recognition Australia is the Australian Government's skills assessment service for people with trade skills gained overseas or in Australia who need an assessment for migration purposes, and offers programs including the Provisional Skills Assessment and the Job Ready Program depending on occupation, country of passport, place of study and visa type sought (Trades Recognition Australia, undated). Start at https://www.tradesrecognitionaustralia.gov.au/ and take visa questions to the relevant Australian Government department or a registered migration professional — this guide cannot give immigration advice.
Can I work for myself straight after my apprenticeship?
It depends on your trade and your state. In NSW, residential building or trade work valued over a stated threshold in labour and materials including GST requires a Contractor Licence (Alpha Technical Training, undated), and some trades also require ongoing continuing professional development and current public liability insurance, with requirements varying by state and trade type (TradieVerify, undated). Check your state or territory regulator before quoting any job.
Where can I check what my trade actually pays right now?
Use three sources together: the Fair Work Ombudsman Pay Guides for award minimums, Jobs and Skills Australia for median weekly earnings by occupation from ABS Labour Force Survey and Census data (Jobs and Skills Australia, February 2026) at https://www.jobsandskills.gov.au/data/occupation-and-industry-profiles/occupations-anzsco, and current job advertisements for what employers in your city are offering this month.