Resume Margins, Font and Spacing Guide

Exact margin, point size and line-spacing numbers for a resume that reads well on screen, prints cleanly and survives applicant tracking software.

By Daniel Ortiz · Published · 16 min read

Featured image for "Resume Margins, Font and Spacing Guide"

Set page margins between 0.5 and 1 inch on all four sides, body text at 10–12 pt in a common serif or sans-serif face, and line spacing at 1.0 to 1.15. That combination reads cleanly on a screen, prints without clipping, and survives the text extraction that applicant tracking systems run on your file before a human ever opens it.

Everything else is a trade-off between white space and content. This guide sets out five layout presets, the situations each one suits, and the exact numbers to type into your word processor.

The options at a glance

Five layouts cover almost every resume you will ever need to send. The differences are margin width, point size and whether the page is one column or two.

LayoutBest forATS-safeProsCons
Standard single-column (1 in margins, 11 pt)Most applications, most industries, 5–20 years of experienceYesReads well on screen and in print; nothing for a parser to misread; looks appropriate in conservative fieldsPlain; no visual differentiation if everyone else uses it too
Compact single-column (0.5–0.75 in margins, 10–10.5 pt)Fitting a full career onto one page, or two dense pagesYesBuys roughly 6–12 extra lines without cutting content; still a clean single columnTiring to read in long stretches; looks crowded if you also shrink spacing between bullets
Open single-column (1–1.25 in margins, 11.5–12 pt, 1.15 spacing)Students, early career, career changers, anyone with half a page of contentYesFills a short page honestly; easiest layout to read; prints well for interviewersWastes space once you have more than about eight years of work to describe
Two-column designed (sidebar for skills and contact)Design, UX, marketing and creative roles sent directly to a person or attached to a portfolioRiskyStrong visual impression; sidebar holds skills and tools compactlyParsers often read across both columns and scramble the order; sidebars sometimes vanish entirely
Long-form academic or federal-style (1 in margins, 11–12 pt, no page cap)Faculty, postdoc, research and clinical roles; US federal government postingsDepends on the systemRoom for publications, grants, teaching and the detail some applications requireWrong for almost every private-sector job; a four-page document reads as a misunderstanding of the brief

If you only ever build one document, build the standard single-column version. It is the one you can send anywhere, and it is the base you compress or open up from.

Each option explained

Standard single-column. One column running the full width of the page, 1 inch margins top, bottom, left and right, body text at 11 pt. Your name sits at the top at 16–18 pt bold, with a single contact line underneath at 10–11 pt: city and state, phone, email, and a professional profile or portfolio address if you have one. Below that, sections stack in order — an optional three-line summary, then Work Experience, Education, Skills, and anything else relevant such as licences or certifications. Section headings run at 12–14 pt bold, often in capitals, sometimes with a thin rule beneath. Use this layout by default: for finance, law, healthcare, engineering, logistics, education, government contracting, manufacturing and any application submitted through an employer's careers portal. It is also the right choice when a recruiter will forward your file onward, because it survives being converted, printed and re-saved without falling apart.

Compact single-column. The same structure, tightened. Margins drop to 0.75 inch, or 0.5 inch if you need more; body text drops to 10.5 pt or 10 pt; the space before each section heading comes down from 12 pt to 6–8 pt; the gap between bullets goes to zero. Reach for it when your content runs three to eight lines past the bottom of the page and the overflow is genuinely worth keeping. Compress in that order — margins first, then spacing, then type size — because readers notice shrunken type before they notice narrower margins. There is a floor: 10 pt body text and 0.5 inch margins. Below either of those, home printers start clipping edges and older eyes start skipping lines. If you are still over after hitting the floor, the problem is the content, not the layout.

Open single-column. Margins at 1 to 1.25 inches, body at 11.5 or 12 pt, line spacing at 1.15, and a little more air before each heading. This is the layout for a first resume, a return to work after time away, or a change of field where the relevant history is short. A half-empty page at 11 pt looks like you ran out of things to say; the same content set generously looks deliberate. It also helps anyone reading your resume on a phone, and it is the kinder choice if the person interviewing you will be reading from a printed copy under bad lighting. Move back to the standard preset as soon as your experience section fills the page without help.

Two-column designed. A narrow sidebar — usually 1.8 to 2.5 inches — carrying contact details, skills, tools and languages, with the main column holding experience and education. Colour, icons and a header band are common. Use it when a human being opens the file directly: an email to a hiring manager you have spoken to, a PDF attached to a portfolio, a printed copy for a design interview, a document sent through a recruiter who has already read it. Do not use it as your only version. Parsing software reads a page as a stream of text, and a sidebar can come out interleaved line by line with the main column, or get dropped. Keep two files: the designed one for people, a standard single-column one for portals. The content should be identical, so you are never caught out by a mismatch.

Long-form academic or federal-style. Academic CVs have no page limit and no obligation to be brief — they list publications, conference papers, grants, teaching, supervision, service and professional memberships in full, usually at 11–12 pt with 1 inch margins and a running header carrying your name and page number. Search committees expect length, and they expect a consistent citation style throughout. US federal government postings are a separate case again: they often ask for detail private-sector resumes leave out, such as hours worked per week, salary history fields, supervisor contact details and grade or series information, and they may run to four or five pages. Read the posting's instructions and follow them literally, because these applications are frequently screened against a checklist of stated requirements.

How to choose

Match your situation to a preset rather than starting from a blank page.

Your situationUseWhy
Applying through a company careers site or a large job boardStandard single-columnThe file will be parsed before anyone reads it; nothing unusual should be in the way
Under five years of experience and the page is half emptyOpen single-columnGenerous spacing at 12 pt fills the page without padding the content
Content runs three to eight lines past page oneCompact single-columnMargins to 0.75 in and body to 10.5 pt usually recovers the overflow
Fifteen or more years with several relevant rolesStandard single-column, two pagesCompressing a long career onto one page costs you the detail that makes it credible
Design, UX, brand or marketing role, emailed directly or attached to a portfolioTwo-column designed, plus a single-column version for portalsThe layout is part of the pitch, but keep a parser-safe file ready
Faculty, postdoc, research fellowship or clinical academic postLong-form academic CVCompleteness matters more than brevity
US federal government postingFollow the posting's stated formatThese applications are checked against the requirements as written
A recruiter asked for an editable copyStandard single-column saved as .docxThey will add a cover sheet or strip your contact details before forwarding
Printing copies for an interview or a career fairStandard at 11–12 pt, 1 in margins, US LetterPrinted text reads smaller than it looks on screen
Applying to employers outside the USStandard single-column on A4, with local conventions checkedPage size, length and what goes in the header vary by country

One more rule of thumb: if you are torn between two presets, pick the more readable one. Nobody has ever been turned down for leaving white space on the page.

Formatting specifications

These are the numbers to type into Word, Google Docs, Pages or a LaTeX template. Where a range is given, the middle of the range is the safe default.

ElementSpecificationNotes
Page sizeUS Letter 8.5 × 11 in for US applications; A4 210 × 297 mm for most of Europe, Asia, Australia and Latin AmericaSet this before you lay anything out — switching afterwards reflows the whole page
Top and bottom margins0.5–1 in; use 1 in by defaultBelow 0.5 in, many home and office printers clip the edges
Left and right margins0.5–1 in, equal on both sidesUnequal side margins look like a template error
Your name16–20 pt, boldThe only element that should be noticeably larger than everything else
Contact line10–11 pt, one line if possible, two at mostCity and state, phone, email; full street address is no longer expected in the US
Section headings12–14 pt bold, capitals optional, 0.5–1 pt rule underneath if you want oneKeep every heading the same size and weight
Body text10–12 pt; 11 pt is the safe defaultNever go below 10 pt; 9 pt is unreadable in print
Line spacing1.0 for dense pages, 1.15 for sparse onesSet it as line spacing, not by pressing Enter twice
Space before a section heading8–12 ptThis is what separates sections, not blank lines
Space after a section heading2–4 ptHeadings should sit close to the content they label
Space between bullets0–4 ptSet to 0 when compressing, 3–4 pt when you have room
Bullet indent0.15–0.25 in hanging indentWrapped lines should align under the text, not under the bullet
Bullet length1–2 lines; never 3Roughly 20–30 words is the practical ceiling
Bullets per role3–6 for recent roles, 2–3 for older onesRoles over ten years old can be a single dated line
Line lengthKeep text lines under about 110 charactersFull-width 10 pt lines across a 7.5 in text block are hard to track
Length1 page under 10 years' experience; 2 pages beyond that; academic CVs uncappedA two-page resume must fill at least three-quarters of page two
File typeText-based PDF unless the posting asks for .docxAvoid .pages, .odt and scanned images entirely
File nameFirstname_Lastname_Resume.pdfAdd the role if you tailor heavily: Firstname_Lastname_Resume_Analyst.pdf
ColourBlack body text; at most one accent colour for name and headingsChoose something dark enough to photocopy — navy or charcoal, not light grey
Date formatMar 2021 – Jun 2024, identical everywhereMonth and year is enough; mixing 03/2021 and March 2021 looks careless
Page 2 headerYour name and "page 2 of 2" is fine on a printed CVKeep your contact details in the body of page 1, not in the document header

The two-line bullet rule does more for readability than any font choice:

Two lines, not four

Weak: Responsible for the management of the accounts payable process and for working with vendors as well as internal stakeholders to resolve a wide variety of invoice discrepancies on an ongoing basis. Strong: Cut invoice approval time from 9 days to 4 by rebuilding the AP workflow across 3 regional offices.

For fonts, pick one and use it throughout. Reliable sans-serif faces include Arial, Helvetica, Calibri, Verdana, Tahoma and Trebuchet MS. Reliable serif faces include Georgia, Cambria, Garamond, Book Antiqua and Times New Roman. Garamond runs small, so set it a point larger than you would set Arial; Verdana runs wide, so set it a point smaller. Avoid script faces, condensed display faces, anything with a "Light" or "Thin" weight, and novelty fonts. If you use a font your word processor downloaded rather than one installed on every machine, export to PDF so the font travels with the file.

ATS checklist

Run through this before you upload anything. Each item takes under a minute to check.

  • Single column through the whole document. No sidebars, text boxes or tables holding your experience, dates or skills. Tables in particular can be read column-by-column instead of row-by-row.
  • Contact details in the body of page 1. Not in the document header or footer, where some parsers never look. Name, phone, email and city and state on their own lines or a single separated line.
  • Plain section headings. "Work Experience", "Education", "Skills", "Certifications". Creative alternatives like "Where I've Made an Impact" give the parser nothing to match on.
  • No images of any kind. No logos, headshots, icons, charts, star ratings or skill bars. A five-dot rating renders as nothing in extracted text, so the skill it describes disappears with it.
  • A text-based PDF, not a picture of one. Open the file in a PDF reader and try to select a line of text with your cursor. If you can't, it exported as an image and no system can read it.
  • Standard bullet characters. The default round bullet or a hyphen. Emoji, wingdings and decorative dingbats come through as question marks or boxes.
  • One consistent date format, month and year. Write dates on the same line as the job title or directly beneath it, never in a separate column or a floating text box.
  • A file name with your name in it. Firstname_Lastname_Resume.pdf. It is what recruiters search for when your application has been sitting in a folder for three weeks.

Frequently asked questions

Should my resume be one page or two?

One page is the US norm for anyone with under about ten years of relevant experience, and for students and recent graduates it is effectively a requirement. Beyond ten years, or where you have a long list of technical projects, publications or licences, two pages is normal and expected — most recruiters would rather read two clear pages than one page set in 9 pt. The rule that matters is that page two must earn its place: if it carries only four lines, cut them or compress page one and go back to a single page. Academic CVs and US federal applications are separate categories with their own conventions, and some employers outside the US expect longer documents, so read the posting before assuming. Put your strongest material in the top third of page one regardless of length, because that is what gets read first and sometimes all that gets read.

Can I use a resume template from Word or Google Docs?

Yes, with two checks. First, look at how the template is built. If the layout uses text boxes, tables, columns or a graphic header band, it will look good on your screen and may come apart in a parser. Click into the document and try selecting all the text with your cursor — if blocks of it won't select as a continuous stream, rebuild it as a single column. Second, change the defaults. Templates ship with placeholder section names, decorative icons and sometimes a photo frame; strip all of it. Templates are also recognisable, and a hiring manager reading twenty applications will see the same one three times. A plain document you built yourself from the specifications above takes about forty minutes and gives you complete control when you need to claw back six lines of space.

Should I include a photo on my resume?

For US applications, no. The convention is a text-only document, many employers ask applicants not to include photos, and some screening processes discard files that contain them. There is no upside: it uses space you need for content and it adds no information a hiring manager is supposed to act on. The convention differs by country — photos are routine on CVs in parts of continental Europe, Latin America and East Asia, and in some places a specific photo format is expected. If you are applying abroad, check what is normal in that country and what the individual employer asks for, and follow their instructions. The same logic applies to date of birth, marital status and nationality: standard on some international CVs, left off US resumes.

Should I send a PDF or a Word file?

Send a text-based PDF unless the posting or the recruiter asks for something else. PDF locks your layout, keeps your fonts and spacing intact on any machine, and prints the way you designed it. Word files reflow when they open on a device missing your font, which is how a carefully balanced one-page resume arrives as one and a quarter pages. The main exception is agency recruiters, who often want .docx so they can add a cover sheet or remove your contact details before sending you to a client — if they ask, send it. Some older application portals also specify .doc or .docx, and a few will only accept plain text. Avoid .pages, .odt, image files and Google Docs share links. Keep a .docx master you edit and export a fresh PDF each time you tailor it.

What font size is too small, and what if I'm just over one page?

Ten point is the floor for body text. At 9 pt, printed copy becomes genuinely hard to read and the document starts to look like it is hiding something. If you are a few lines over, compress in this order: pull margins from 1 inch to 0.75 inch, then set the space between bullets to zero, then reduce the space before section headings from 12 pt to 8 pt, then drop body text from 11 pt to 10.5 pt. That sequence usually recovers eight to twelve lines without the page looking squeezed. If you are still over, edit instead: cut the summary to three lines or delete it, reduce roles older than ten years to a single dated line, remove a references line, and shorten any bullet that runs to three lines. Overflow is almost always a content problem wearing a formatting costume.

Will a two-column layout get my resume rejected?

It will not trigger an automatic rejection, but it can garble how your experience is stored and read. Parsing software treats a page as a stream of text, and a sidebar is frequently read across the page line by line, interleaving your skills list with your job history, or skipped entirely. If that happens, your dates and titles may be attached to the wrong employer in the recruiter's database. The practical answer is to keep two versions: a single-column file for anything uploaded to a portal, and a designed two-column file for direct emails, portfolio attachments and printed interview copies. Keep the wording identical in both so the version a hiring manager reads matches the version in the system.

Does the font I choose actually matter?

Less than consistency does. Any of the common sans-serif faces — Arial, Helvetica, Calibri, Verdana, Tahoma, Trebuchet MS — and common serif faces — Georgia, Cambria, Garamond, Book Antiqua, Times New Roman — will read cleanly and extract cleanly. What matters is using one family throughout, varying only weight and size, and setting the point size to suit the face: Garamond at 11 pt looks smaller than Arial at 11 pt, so bump it to 12 pt, and Verdana at 11 pt looks oversized, so take it to 10 pt. Avoid light and thin weights, which wash out when printed, and avoid condensed faces, which you will be tempted to use to cram in more text. If you want a small point of difference, use a serif face for headings and a sans-serif for body text, or the reverse — two families is the maximum.

More in Resume & CV Guidance

Featured image for "How to List Certifications on a Resume (+ Examples)"
Resume & CV

How to List Certifications on a Resume (+ Examples)

List each certification as its own line in this order: certification title, awarding organization, date earned, and the skills it proves where that helps (Indeed, undated). Most resumes put a dedicated, clearly headed certifications section after education, in reverse chronological order, with the issuer, date and credential ID or verification link on each entry (Jobscan, undated; MentorCruise, undated).

Ananya Rao · 13 min read

Featured image for "20 Resume Keywords by Field to Pass an ATS Scan"
Resume & CV

20 Resume Keywords by Field to Pass an ATS Scan

Use the keywords that actually appear in the job ad you are answering, in the posting's own wording, and back each one with a bullet that has a number in it. CareerOneStop advises that because applicant tracking software is so common in U.S. hiring, a resume should use exact terms from the job posting, since any variation may fail to be recognized as a qualification (CareerOneStop, undated).

Nadia Hassan · 13 min read

Featured image for "How to List Freelance and Gig Work on a Resume"
Resume & CV

How to List Freelance and Gig Work on a Resume

Freelance, contract and gig work belongs in your work history like any other job: a job title that describes what you actually did, the word "(Freelance)" or "(Contract)" after it, real start and end dates, and bullets that show scope. The decisions that take thought are how to group a long client list, how much to say about part-time hours, and which small gigs to leave off entirely.

Priya Shah · 13 min read

Featured image for "Administrative Assistant Resume Examples & Writing Guide"
Resume & CV

Administrative Assistant Resume Examples & Writing Guide

An administrative assistant resume works when it shows scope: how many calendars you run, how many calls or invoices you handle, which systems you work in, and who you support. Below is a complete mid-level sample and a shorter entry-level version, followed by section-by-section instructions, weak-versus-strong bullet pairs, a skills table, and where to check current pay.

Desmond Okafor · 18 min read